SNMPD for test purposes

Sometimes you need an snmp source for testing something in Checkmk. For this, you can use the snmp daemon.

Table of Contents

This short manual is tested with Ubuntu 20.4 and is not supported by Checkmk.

Step-by-step guide

Install snmpd and snmp
```
root@linux# sudo apt install snmpd snmp
```
.
The file /etc/snmp/snmpd.conf contains the configuration of SNMPD. To query the SNMP from different sources, comment the below line:
/etc/snmp/snmpd.conf
```
#agentaddress 127.0.0.1,[::1]
```
.
Restart the snmp service
```
root@linux# /etc/init.d/snmpd restart
```
.
Now you can create a snmpwalk by using snmpbulkwalk. This will work locally as well as remotely.
```
root@linux# snmpbulkwalk -v2c -c public mysnmpdtesthost01
```