Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

The official user guide outlines the basics, of how to create custom reports. This article elaborates on that and shows how to add a custom (e.g., customer) logo to your reports.

LAST TESTED ON CHECKMK 2.2.0P14


Table of Contents

Step-by-step guide


  1. Click on Customize and then Reports

    Image shows the location of Customize on the left side. It then shows the location of Reports near the bottom of the list.


  2. Click on the double window icon to edit the report

    Image shows the location of the Double Window icon used to edit reports.


  3. Near the option for editing the image is near the bottom of the page. Click the pencil to edit

    Image shows location of the edit pencil near the bottom of the page for the image element


  4. Configure the report for the image

    Image showing the options withing the fixed page element section

    In this example, the position is set to -6.0 mm down and 50 mm in width. These settings will need to be adjusted based on desired position and image size.


  5. After configuring the report, a preview is available on the left side.

    Image displays what a report should look like after adding a custom image

    The file used in this demonstration

    Image of the custom image used for this article. Image says customer logo


  • No labels