There are some things to consider in preparation for migrating your checkmk server. There are also several scenarios regarding migration.

LAST TESTED ON CHECKMK 2.0.0P1

Scenario: Change the IP address of your Checkmk server

Things to consider

Agent Updater
- If the update server is not configured as a DNS name, make sure to update the IP address of the update server prior to migration.
- Ensure your TLS certificates match the new server configuration and are baked into the agent.
- Verify that all agents are up-to-date!
Agent Access
- Checkmk Agent: Ensure your IP whitelist contains both the old and new IP of the server prior to the migration (Rule: Allowed agent access via IP address (Linux, Windows))
- SNMP: Ensure ACL on SNMP devices will allow the new IP
- TLS Encryption: If you have registered to the Checkmk server using an IP/DNS name, you have to make sure this either remains the same or you have to re-register
Firewall
- Make sure your central firewall(s) allow all necessary traffic (See the following article for reference: Network ports used by Checkmk)
Routing
- If custom routes have been configured on the checkmk server, make sure to check and, if necessary, adapt them.
Webserver
- If the server name changes, you need to acquire new certificates. See also the section Agent Updater!
Mailserver
- Make sure your mail server is still accessible from the new IP
Event Console
- If your server acts as a target for SNMP traps or remote syslog messages, you might have to change the target IP/DNS name on the sending devices.